WiFi Amplifier 2400 MHz

• IEEE 802.11b Only Compatible
• Active Power Control
• N-Female Connectors
• Includes DC Injector and Mast-Mount Hardware

Transmit Power 1 Watt (30 dBm)
Receive Gain 15 dB nom.
Frequency 2400 – 2500 MHz
Max. Input Power 100 mW (20 dBm)
Operating Mode Bi-directional, half-duplex Time Division Duplex. Senses RF carrier from transmitter and automatically switches from receive to transmit mode
Operating Temperature -40°C to 50°C
Dimensions 117 x 64 x 33 (mm)
Weight 30 Kg
Current Draw 0.80A Peak Tx and 0.06A Peak Rx
Supply Voltage 9-12VDC -/+1V
SKU: HA2401G-1000 Category: Tags: , , ,


 WiFi Amplifier HA2401G-1000

HyperAmp® HA2401G-1000 amplifiers are compatible with 802.11b wireless LAN equipment.
HyperLink ‘s Active Power Control circuit automatically adjusts the amplifier’s gain to provide a constant output power regardless of cable length.

The HyperAmp® HA2401G-1000 series improves range by delivering full transmit power directly at the antenna where it is most effective.
In addition the unit’s receive gain compensates for cable losses. The unit can be configured to deliver the full transmit power with as little as 1 mW of input power,
permitting cable runs of several hundred feet with no degradation in operating range.

The HA2401G-1000 models feature rugged, cast aluminum weather-proof construction to ensure years of reliable operation in the harshest environments.
The integral mast mount gives this amplifier superior strength as well as simplifies installation. Included with the outdoor models,
the DC Power Injector provides power to the HyperAmp® through the antenna cable, simplifying installation.
Current-sensing circuits provide remote amplifier diagnostic LEDs. In addition, this unit provides effective lightning protection with multi-strike capability.

The power supply included with the amplifier is rated at 100-240 VAC @ 50/60 Hz allowing it to be used in the US as well as in the EU

This HyperLink bi-directional amplifier is designed for burst half-duplex operation. It is not intended for constant transmit or CW operation.
Operation of the amplifier in CW mode will damage the amplifier and void the warranty.